Freeze-thaw vacuum treatment of landfill sludge: Mechanism of uneven frost heaving and dewatering performance

Abstract

The method of freeze-thaw combined with vacuum pretreatment for landfill sludge (LS) has attracted extensive attention. However, most of the existing approaches are based on small-scale laboratory testing, and further testing studies must be performed to realize in situ treatment. To enhance the practicality of such approaches, the range of temperature effects on LS was analysed after field freeze-thaw model testing. After the freeze-thaw model test, samples were transported to the laboratory for unidirectional oedometer tests, and the remaining samples were retained in the field to continue vacuum model testing for exploring the differences in the consolidation and drainage effect of the LS. Results show that temperature changes during freeze-thaw process affect the distribution of sludge and water in the model boxes, resulting in frost heave and the appearance of “extrusion rings”. In addition, the coefficient of consolidation obtained from the unidirectional oedometer test shows that the consolidation coefficient is generally larger near the freezing tubes at a lower temperature. The settlement determined from the field vacuum preloading test shows that the subsequent vacuum consolidation settlement is larger at the position with a lower elevation of the frozen sludge surface. The comparison indicates that the consolidation and drainage effect in the field is not as significant as that in the laboratory. The findings can provide reference to optimize the field conditions during the in situ engineering practice of sludge treatment.