Abstract
High free volume, film-forming copolymers were prepared in which a proportion of the spiro-units of PIM-1 were replaced with units derived from 9,10-dimethyl-9,10-dihydro-9,10-ethanoanthracene-2,3,6,7-tetrol (CO1). A full investigation of free volume, utilizing N2 sorption, positron annihilation lifetime spectroscopy (PALS), Xe sorption and 129Xe NMR spectroscopy, was undertaken for copolymer PIM1-CO1-40 (spiro-units:CO1 = 60:40) and a comparison is made with PIM-1. All techniques indicate that the copolymer, like PIM-1, possesses free volume holes or pores on the nanometre length scale (i.e., microporosity as defined by IUPAC). For the batch of PIM-1 studied here, the sample as received showed anomalous N2 sorption, Xe sorption and 129Xe NMR behavior that could be interpreted in terms of reduced porosity in the size range 0.6−0.7 nm, as compared to the copolymer. The anomalous behavior was eliminated on conditioning or relaxation of the polymer, e.g., by Xe sorption at 100 °C and 3 bar. PALS for both PIM...
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.