Abstract
A new diffusion-based simulation model of isotropic wet etching and free-form surface characterization method for 3-D free-form microelectromechanical systems (MEMS) fabrication is presented in this paper. To simulate the etching process, a diffusion-based model solved by the finite-element method (FEM) has been developed, allowing extraction of more accurate etch-front data at discrete time steps. In the developed method, free-form MEMS objects are modeled as B-spline functions with material concentration. Finite elements are generated by discretization in the parametric domain of the free-form object and mapping back to the Euclidean space. Points on the etch front are extracted using a Z-map method. The extracted point data are characterized to obtain a B-spline representation of the etch-front surface. Examples from the isotropic etching simulation of 2-D and 3-D objects with both regular and free-form geometry are presented. The developed method allows the simulation of 3-D objects with free-form input and free-form mask opening and facilitates the simulation of sequential etching of free-form objects with irregular mask openings. This paper also discusses applications of the developed method in MEMS process planning that can be realized by taking advantage of the better control of geometry that it provides in MEMS fabrication.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.