Free-field calibration of measurement microphones at frequencies up to 80 kHz

Abstract

Civil-aviation noise-reduction programs, that make use of scaled-down aircraft models in wind tunnel tests, require knowledge of microphone pressure (i.e., not free-field) sensitivities beyond 20 kHz—since noise wavelengths also scale down with decreasing model size. Furthermore, not all microphone types (e.g., electrets) are easily calibrated with the electrostatic technique, while enclosed cavity calibrations typically have an upper limit for the useful frequency range. Thus, work was initiated to perform a high-frequency pressure calibration of Panasonic electret microphones using a substitution free-field method in a small anechoic chamber. First, a standard variable-frequency pistonphone was used to obtain the pressure calibration up to 16 kHz. Above 16 kHz, to avoid spatially irregular sound fields due to dephasing of loudspeaker diaphragms, a series of resonant ceramic piezoelectric crystals was used at five specific ultrasonic frequencies as the free-field calibration sound source. Then, the free-field sensitivity was converted to a pressure sensitivity with an electrostatic calibration of the reference microphone (an air condenser type), for which the free-field correction is known. Combining the low- and high-frequency data sets, a full frequency calibration of pressure sensitivity for an electret microphone was generated from 63 Hz to 80 kHz.