Abstract
Robustness is a key factor in the safety of structures and structural components or sub-assemblies against progressive or disproportionate collapse, the latter term being classically used to indicate a significant disproportion in size between the initial and final damage configurations. Particularly for a steel moment-resisting frame (MRF), the connections play a pivotal role in the robustness and redundancy of the structural system because an alternative load path could be mobilised when/if the beam-column joints have enough capacity to sustain the abnormal extra-loads developed following the loss or notional removal of a support element as consequence of a triggering event.Although the latter is usually but not exclusively related to terrorist attacks (e.g. faulty construction, uncontrolled gas releases, etc.) and the structural behaviour inherently involves uncertainties in loads and system capacity, progressive collapse has been probabilistically assessed in a few studies, mainly focussed on reinforced concrete structures. In light of this, delving more into probabilistic approaches could be timely, and this paper presents the main results of sensitivity and fragility analysis of steel MRFs featuring top-and-seat with web angle connections, leading to the derivation of both tornado diagrams as well as fragility models. The former ones quantify the progressive collapse sensitivity to design parameters, whilst the latter ones provide the probability of failure as a function of a given intensity measure. Uncertainties in material and geometrical properties of building portfolios were modelled and propagated through Monte Carlo simulation, whereas component-based modelling was integrated with the pushdown methodology for damage analysis of the randomly sampled building realisations. The obtained results show the influence of the studied parameters/random variables on progressive collapse behaviour/fragility and provide insights into the effect of changing the seismic intensity for the design and the column-removal scenario for the assessment of a bolted-angle joint system that has not been probabilistically treated up until now.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.