Abstract
Fracture toughness testing of material with cylindrical geometry is discussed, and the inherent advantages of the C-shaped specimen in this situation are given. A K calibration equation for the C-shaped specimen is presented which is based on boundary value collocation results. The C-shaped specimen K calibration is compared with those for the standard compact specimen and the single-edge-notched bar specimen. Guidelines for measuring plane-strain fracture toughness (K I c ) using the C-shaped specimen are described, including (a) a K I calibration which applies over a wide range of diameter ratios and to two load point locations in segments of hollow cylinders, as well as over a range of crack lengths, (b) compliance and crack-mouth-displacement analyses and their use to obtain critical value of K, in a fracture toughness test, and (c) suggested specimen geometries to be used in performing K I c tests with C-shaped specimens. The use of C-shaped specimens for performing J-integral fracture toughness tests and fatigue crack growth tests is described, and some preliminary testing guidelines are offered. Included are suggested methods of load-point-displacement measurement for J-integral tests and suggestions for the geometry and K calibration which could be used in fatigue tests.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
