Fracture Toughness Testing and Validation of Pipeline Girth Weld Flaw Acceptance Criteria for Sour Service Under Large Strain

Abstract

Fracture toughness is one of the most important input parameters for assessment of pipeline girth weld failure capacity. For many new subsea pipeline projects there is a need to develop flaw acceptance criteria for pipeline installation considering the operation phase which may involve the transport of sour oil and gas and where the pipeline is exposed to large axial strain due to local buckling. Engineering Critical Assessment (ECA) performed using laboratory data based on conservative KISSC testing gives small acceptable flaw sizes which may be below the workmanship criteria for pipeline laying. DNV has conducted extensive research based on the requirements of DNV-OS-F101 and DNV-RP-F108, aiming to establish a method to develop J-R curves applicable for ECA of pipeline girth welds in sour service environment and a methodology to validate the ECA by segment testing in a laboratory-simulated sour service environment as per DNV-RP-F108.