Abstract
Two different clay loadings were added to OPEFB/PP/MAPP which was 7 phr and 10 phr in order to see its effect on the fracture toughness. Standard dimension of samples was prepared for 180 μm, 355 μm and 355 μm treated with 1% NaOH. The result showed that 7 phr clay contents had the highest fracture toughness of 1.16 MPa.m1/2. Alkali treatment on OPEFB fiber gave 7% improvement of fracture toughness for samples with 7 phr PPnanoclay loading. SEM images show the improvement of bonding between the fibers and the matrix upon alkali treatment.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.