Abstract
Stress singularity of a transverse crack normal to ply-interface in a composite laminate is investigated using analytical and finite element methods. Four-point bending tests were performed on single-notch bend specimens of graphite/epoxy laminates containing a transverse crack perpendicular to the ply-interface. The experimentally determined fracture loads were applied to the finite element model to estimate the fracture toughness. The procedures were repeated for specimens under cryogenic conditions. Although the fracture loads varied with specimen thickness, the critical stress intensity factor was constant for all the specimens indicating that the measured fracture toughness can be used to predict delamination initiation from transverse cracks. For a given crack length and laminate configuration, the fracture load at cryogenic temperature was significantly lower. The results indicate that fracture toughness does not change significantly at cryogenic temperatures, but the thermal stresses play a major role in fracture and initiation of delaminations from transverse cracks.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
