Abstract
Objectives. The objectives of the current investigation were two-fold: (1) to examine the effect of different powder/liquid ( P/ L) ratios on the fracture toughness of commercial resin-modified glass ionomer cement and conventional glass ionomer cement, and (2) to evaluate the effect of powder size reduction on the fracture toughness of experimental resin-modified glass ionomers in order to improve their physical properties. Methods. The P/ L ratios of the glass ionomer and resin-modified glass ionomers were varied from the manufacturer's recommended ratio to 2.0 and 1.0 by weight. The powder particle sizes for the experimental resin-modified glass ionomers tested were 2, 5, 10 and 25 μm in diameter. Fracture toughness was determined on ring-shaped specimens with a fatigued pre-crack. Results. The fracture toughness of the resin-modified glass ionomers was significantly higher ( p<0.005) than that of the glass ionomer and was not greatly influenced by the P/ L ratio. For the experimental resin-modified glass ionomers, it was observed that fracture toughness gradually decreased as the powder particle size became finer. Significance. The resin components in the liquid play an important role in the improvement of the physical properties of the resin-modified glass ionomer. A reduction in the powder particle size of up to 10 μm, which resulted in a smoother surface, can maintain high fracture toughness. The high fracture toughness values of the resin-modified glass ionomer may be one of the factors contributing to a favorable clinical outcome in high stress-bearing areas.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have