Abstract
Abstract This paper studies the differences in fracture properties (stress intensity factors and energy release rates) of nanocomposites of thermosetting polymer EPON 862 and its nano-graphene reinforced counterparts. Extremely low (0.1 and 0.5) weight percent nano-graphene platelets were dispersed in EPON 862 matrix and compact tension (CT) fracture experiments were conducted under quasi static loading conditions using displacement control. Significant enhancements in fracture toughness (∼200%), and energy release rate (∼570%) respectively were observed for nano-graphene reinforced matrix for only 0.5 wt% of graphene platelets. Fractography analysis of the fractured CT specimens was used to qualitatively visualize and understand the mechanism(s) responsible for the enhancement in these properties using Scanning Electron Microscopy (SEM). Evidence of crack deflection due to increased surface roughness, graphene platelet pullout and plastic deformation of the matrix causing filler-matrix debonding, was observed from SEM micrographs, caused by the addition of nano-graphene platelets (NGP). Atomic Force Microscopy (AFM) was also used to quantify the magnitude of surface roughness changes between the NGP reinforced and reinforced nano-composite samples, and correlate surface roughness changes due to crack deflection to increased fracture toughness.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
