Fracture performance of fiber reinforced geopolymer: Synergetic perspective

Abstract

It is well-known the hybridization of different types of fibers exaggerates the contribution of mono fiber reinforcement on the mechanical and/or fresh properties of the concrete. Despite this fact, very few researchers have pointed out the synergetic effect of hybrid fibers on the fracture response of the geopolymer concretes. Hence, the present work seeks to extend the current knowledge of material science to cover the synergetic effect of hybrid fibers. To this end, a total of 15 mixtures, including plain matrix were manufactured. Steel, carbon, and glass fibers were incorporated into the mixtures at varying ratios. For the fracture evaluations, the rectangular prisms with the central notches were exposed to a three-point static bending test. Crack formations on the specimen surfaces were recorded through the 2D digital image correlation (DIC) method. Test results were examined in terms of some mechanical and fracture properties of geopolymer composites. Accordingly, the compressive strength, Young's modulus, flexural strength, limit of proportionality, and residual strengths were evaluated as the mechanical properties, while the fracture energy, characteristic length, effective crack length, initial stress intensity factor, and unstable stress intensity factor were considered as the fracture properties. Based on the experimental results, carbon fiber was found to be capable of increasing pre-peak mechanical response, while the steel and glass fibers were useful in improving the post-peak fracture properties of geopolymer concretes. In most cases, similar results were also attained for the hybrid fiber-reinforced concretes.