Fracture mechanism of tight sandstone under high and complex 3-D stress compression: Insights from acoustic emission

Abstract

Tight sandstone gas (TSG) reservoirs are developed in large buried depths and complex geo-stress field environments. During exploitation, the surrounding rock of a drill well is often damaged or can collapse under artificial engineering disturbances. Understanding the failure mechanism of tight sandstone under high and complex three-dimensional (3-D) stress states is essential for the safe and efficient exploitation of TSG. In this study, using the stress Lode angle ( θ σ ) as a variable, failure experiments of low porosity sandstone specimens under various 3-D stress paths are performed, and the mechanical responses (e.g., stress–strain behavior, strength, fracture pattern, and acoustic emission characteristics) are analyzed. The results show that as θ σ increases, the strength of the specimen as well as the deviatoric stress required its failure decrease linearly, whereas its brittleness increases. The failure of the specimens is primarily due to numerous micro tensile cracks and a few macro shear cracks. θ σ significantly affects the cracking mode during failure. Acoustic emission (AE) parameters show that the failure process can be categorized into three stages within the time-to-failure window, among which Stage 2 (acceleration stage) can be regarded as the precursor stage of the ultimate failure of the specimen. The descriptive statistical results of AE energy show that uniaxial stress, hydrostatic stress, and true triaxial stress compression impose different effects on the damage mode of the specimens. Under the high 3-D stresses, the multiple fracture surfaces formed inside the specimen are intertwined to present several “X”-shaped fracture pairs. These findings facilitate the understanding of the failure mechanism of rock mass surrounding the wellbore, and of significance in stability designing in well trajectory of TSG reservoir actual development. • Stress Lode angles significantly affect cracking mode of tight sandstone. • Uniaxial stress, hydrostatic stress, and true triaxial stress compression impose different effects on damage mode of tight sandstone. • Precursor stage of tight sandstone ultimate failure under complex three-dimensional stress conditions can be identified through acoustic emission signals.