Fracture Load for Periprosthetic Femoral Fractures in Cemented Versus Uncemented Hip Stems: An Experimental in Vitro Study

Abstract

This cadaveric study examined fracture loads in cemented and uncemented hip stems. Additionally, individual data and bone quality were analyzed and correlated to fracture patterns and fracture load. Cemented or uncemented hip stems were implanted in a randomized fashion in 10 matched paired fresh-frozen femora (donor median age, 78 years, and donor median weight, 74.2 kg). Bone density was measured before the femurs were fractured under load (maximum load of 10,000 N), and fracture patterns were analyzed according to the Vancouver and Johansson classification systems. In the uncemented group, all of the femurs fractured with a median load of 2625 N (range, 1725-7647 N). In the cemented group, 5 femurs fractured with a median maximum load of 9127 N (range, 2845-10,000 N) and 5 femurs did not fracture with a maximum load of 10,000 N. Fracture load corresponded to 4 times and 8.8 times body weight in the uncemented and cemented groups, respectively. Fracture patterns corresponded to Vancouver type A fractures in uncemented stems and Vancouver type C fractures in cemented hip stems. Analysis showed a significant correlation between fracture load and bone density in the uncemented group, whereas there was no correlation in the cemented group. Patients with poor bone quality treated with an uncemented hip stem are at higher risk for periprosthetic fractures; therefore, we recommend cemented stems in this group of patients. Cementation appears to protect against periprosthetic fractures, probably from internal stiffening of the femoral cavity.