Abstract
Acoustic emission (AE) is an important nondestructive evaluation (NDE) technique used in the field of structural engineering for both case local and global monitoring. In this study AE technique with a new approach was employed to investigate the process of fracture formation in reinforced concrete structure. A number of reinforced concrete (RC) one story frames were tested under loading cycle and were simultaneously monitored using AE. The AE test data was analyzed using the relaxation ratio and calm and load ratio method. Also, the relaxation ratio was dominated with approaching load to 58% of the ultimate load. In addition three levels of damage using calm and load ratio were distinguished. The trend of relaxation ratio and calm and load ratio method during loading and unloading showed that these methods are strongly sensitive with cracks growth in RC frame specimens and were able to indicate the levels of damage. Also, results showed that AE can be considered as a viable method to predict the remaining service life of reinforced concrete. In addition, with respect to the results obtained from relaxation ratio and, load and calm ratio indicated, a new chart is proposed.
Highlights
Acoustic emission (AE) testing is a useful nondestructive technique for real-time examination of the behaviour of materials deforming under stress [1]
The reinforced concrete (RC) frames described early were tested under loading cycle
This paper provides the results from tests on RC frame under loading cycle and was monitored by AE throughout the test
Summary
AE testing is a useful nondestructive technique for real-time examination of the behaviour of materials deforming under stress [1]. Relaxation ratio and calm and load ratio which are derived from events during unloading and loading are reasonable methods for evaluation of structure under cyclic load. The relaxation ratio and calm and load ratio have been used by several researchers to evaluate structural damage. A few works found that relaxation ratio have been used for evaluation of concrete structure such that [5,6,7] have been investigating several RC beams under cyclic load using relaxation ratio. They found that relaxation ratio is more than one when approximately 45% of the ultimate bending load was reached. Several works found that calm and load ratio has been used for evaluation of concrete structure such as [5, 6, 8,9,10,11]
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
