Fracture behaviors of HVFA-SCC mixed with seawater and sea-sand under three-point bending

Abstract

This paper aims to study the fracture behaviors of high-volume fly ash-self-compacting concrete (HVFA-SCC) mixed with seawater and sea-sand (SWSS) or freshwater and river sand (FWRS). Three-point bending test were performed on 24 notched beams fabricated with varying in replacement ratio of fly ash (0%, 30%, 50%, and 70%) and the type of water and sand (SWSS and FWRS). The initial and unstable fracture toughness of these test specimens are determined by the double- K fracture model. The effect of fly ash replacement ratio and type of water and sand on the fracture parameters is analyzed and discussed. In addition, the cohesive fracture toughness of all the test specimens is calculated by using Gauss–Chebyshev integral method and the weight function method based on the bilinear tensile softening curve given in CEP-FIP Model Code. A comparison of fracture toughness parameters of determined from the experimental approach and analytical approaches is presented in these SCC specimens. Results show that SCC mixed with SWSS replacing FWRS can improve the unstable fracture toughness and fracture energy, and decrease its brittleness behavior. The cohesive fracture toughness of SWSS-SCC specimens is underestimated by these analytical methods based on the tensile softening curve given in CEP-FIP Model Code.