Abstract
Breaking glass and its subsequent fallout may markedly affect enclosure fire dynamics. However, little is known about the thermal fracture behavior of framing glass façades in different installation forms. Sixteen 600×600×6mm3 solar control coated glass panes, installed in exposed, semi-exposed and hidden frames, were heated by a 500×500mm2 n-heptane pool fire to investigate the influence of frame constraints on glass breakage and fallout. Measurements were taken of the time to breakage occurrence, heat release rates, incident heat flux, central gas temperatures and glass surface temperatures. Measurements in relation to crack initiation and propagation as well as loss of integrity of the glazing assembly were also recorded. The experimental results show that all cracks initiated at the edge of covered sections and intersected rapidly, forming islands. The maximum temperature difference and heat flux that the glass can withstand are primarily in the range of 50–90°C and 9–15kW/m2. Using the finite element method (FEM), the breakage mechanism is demonstrated, the predictions of which are in reasonably good agreement with the experimental results. Among four different installation forms, semi-exposed framing façades showed better fire resistance than exposed framing façades. Meanwhile, the fire resistance of hidden framing façades may depend on the fire location. It is intended that these results will provide practical guidelines for fire safety design.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.