Fracture behavior and size effect of UHPFRC: Experimental and meso-scale numerical investigation

Abstract

In this research, the fracture characteristics and size effect of ultra-high performance fiber reinforced concrete (UHPFRC) are investigated by notched three-point bending beam test and meso-scale numerical simulation. Four series of geometrically similar UHPFRC notched-beams with different sizes were tested at quasi-static condition. Crack patterns during the fracture process were obtained by digital image correlation and the phenomenon of crack initiation, multiple cracking and crack localization were well captured. The macro-scale fracture properties are analyzed by double-K fracture model (DKFM) from the perspective of composite toughening. Results show that the initial fracture toughness evaluates the toughness of matrix and the increment from initial fracture toughness to unstable fracture toughness evaluates the toughening due to fiber bridging. The initial fracture toughness and unstable fracture toughness have no size effect and can be treated as material inherent. Experimental results also show a slight decreasing tendency of strength with the increasing of specimen size, which can be approximately fitted by size effect law (SEL). Then a meso-scale numerical model was developed by explicit representation of fibers and directly considering bond-slip relationship of fiber–matrix. Simulation results show that the meso-scale numerical model developed in this research can well simulate the fracture of UHPFRC in terms of crack patterns, fracture process zone, mechanical response and size effect. Parametric study was also conducted based on the meso-scale numerical model and the effects of fiber content, fiber orientation and interfacial bond strength on fracture performance and size effect are analyzed.