Abstract
In this work the parameters of Low Temperature Conversion – LTC were applied in a centrifuged sludge from a sewage treatment plant located in Rio de Janeiro, Brazil. Before the conversion, the sludge was dried and analyzed by TGA to observe its behavior with increasing temperature. The chemical composition of the crude pyrolysis oil was analyzed by FTIR, 1H NMR and GC–MS. The results showed that the oil is a mixture of hydrocarbons, oxygenated and nitrogenated compounds. Using a catalytic treatment it was possible to fractionate the oil where the predominant constituents were hydrocarbons showing that the cracking was effective. An important result was the difference between the calorific value of dry sludge (10MJkg−1), the pyrolysis oil (36MJkg−1) and one of the fractions separated by catalytic cracking (40MJkg−1) when compared with commercial diesel (45MJkg−1).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
