Fractionation of Transition Metals by Solvent Extraction and Precipitation from Tannic Acid-Acetic Acid Leachate as a Product of Lithium-Ion Battery Leaching

Abstract

Solvent extraction and precipitation schemes are applied to isolate copper, cobalt, manganese and nickel from leachate, produced from spent lithium-ion battery leaching using tannic acid-acetic acid as lixiviant. The metal separation and purification were developed based on a ketoxime (LIX® 84-I) and a phosphinic acid (Cyanex® 272) extraction system. Aside from the leachate’s initial pH, which dictates the metal isolation flowsheet, other parameters affecting metal extraction rate, such as phase ratio, extractant concentration, and acid stripping will be evaluated. Copper was selectively removed from leachate at pH 3, using LIX® 84-I 10% v/v followed by cobalt and manganese co-extraction from the raffinate using Cyanex® 272 10% v/v at pH 5. After both metals were stripped using sulfuric acid 0.2 M, manganese was quantitatively precipitated out from the strip solution using potassium permanganate or sodium hypochlorite. Nickel was isolated using LIX® 84-I from raffinate at pH 5, producing a lithium- rich solution for further treatment. No third phase was formed during the extraction, and sulfuric acid was proved suitable for organic phase regeneration.