FPGA-Based Extended Control Set Model Predictive Current Control with a Simplified Search Strategy for Permanent Magnet Synchronous Motor

Abstract

The conventional finite control set model predictive current control (FCS-MPCC) suffers from suboptimal steady-state performance, primarily due to the limited selection of only eight basic voltage vectors in each control cycle. To overcome this limitation, the proposed extended control set MPCC (ECS-MPCC) utilizes an control set consisting of 818 selectable vectors, enabling a more refined voltage output and achieving a deadbeat response for current control by minimizing the cost function. To mitigate the computational burden resulting from the substantial increase in voltage vectors, a simplified search strategy is devised, which can be extended to other multi-objective cost functions. Remarkably, based on the inherent parallelism of the algorithm, the ECS-MPCC is implemented on an FPGA, further reducing the overall control time of the current loop to an impressive 0.61 μs. Through simulation and experimental tests on a laboratory PMSM driver, the effectiveness of the proposed ECS-MPCC strategy is validated. The experimental results demonstrate a significant reduction of 79% in the total harmonic distortion of phase currents compared to the conventional FCS-MPCC approach. This improvement underscores the superiority of the ECS-MPCC in enhancing the performance of PMSM drives, thereby illustrating its potential for practical implementation in real-world applications.