Abstract
When tailored to make durable thermal barrier coatings (TBCs), the Solution Precursor Plasma Spray (SPPS) process produces a microstructure containing uniformly vertical cracks. These cracks provide a high degree of strain tolerance to the ceramic top coat. In order to understand the formation of vertical crack in SPPS process, coatings of various thicknesses were deposited on a variety of substrates with vastly different thermal properties. These coatings were characterized in the as-sprayed state and after heat treatment. It has been determined that the tensile stress derived from the pyrolysis of precursor occurring during coating deposition or post heat-treatment is the major driving force for the formation of vertical cracks in SPPS TBCs.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.