Abstract
AbstractThe reaction between an amorphous silicon film, with a titanium film, yields the formation of a titanium silicide film useful in the fabrication of local interconnection lines (straps) for integrated circuits. In this work we look at the influence of the films thickness ratios on the silicide formation on silicon dioxide. For structures with 70 or 80 nm of amorphous silicon deposited on 40 nm of titanium, we found that after a low temperature treatment of 650 °C, nominally utilized in the first processing step for the formation of self-aligned silicides, the formation of the metastable TiSi2 (C 49) and Ti5Si3 phases occurs. For silicon rich structures i.e.. 90 nm of amorphous silicon on 40 nm of titanium, besides the stable TiSi2 (C54) the metastable phases mentioned above are also detected. In this case strong morphological changes, and silicon precipitates are observed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.