Abstract
Conditions were investigated for preparing needle-like hydroxyapatite (HAp; Ca10(PO4)6(OH)2) by hydrothermal processing of mixed calcium phosphate powders consisting of dicalcium phosphate dihydrate (DCPD; CaHPO4·2H2O) and beta-tricalcium phosphate (β-TCP; β-Ca3(PO4)2). The powder mixture was subjected to two-step hydrothermal processing in which the compacted powder was treated first by exposure to vapor of the liquid and subsequently by immersion in the liquid. High aspect ratios were obtained in samples with crystal sizes around 60 μm in length from the reactant mass ratio composition of β-TCP/DCPD = 1/9 by treatment at 160°C for 0.5 h under vapor conditions, followed by liquid conditions for 24 h with renewal of the liquid at 12 h. Initial compositions and pH conditions were the main parameters determining the formation of needle-like HAp by hydrothermal processing.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.