Abstract

Soot formation during very fuel-rich oxidation of ethylene (with equivalence ratio, φ, ranging from 3 to infinity) at relatively low temperatures (1473–1673 K) was studied in a flow reactor, in which temperature was well controlled through an external heater, and φ of the reactants was adjusted by adding different amounts of O2 (0–6000 ppm) at the inlet of the reactor. Detailed sooting properties including soot volume fraction, number density, particle size distribution (PSD), and morphology were examined. The results show that at a temperature of 1673 K, the total soot yield increases monotonously with φ. However, at 1473 and 1573 K, the soot volume fraction increases first and then decreases as φ increases from 3 to infinity, which means a small amount of oxygen can promote soot formation. The PSD and number density results indicate that this promotion effect is more prominent at the nucleation stage and weakens as soot grows at longer residence times. In addition, soot morphology is affected mostly by temperature rather than φ, and the decrease of temperature leads to larger primary particles and less fractal aggregates. Kinetic modeling results indicate that the concentrations of PAHs and soot increase because a small amount of O2 addition can enhance the C3 + C3 pathways through the generation of reactive oxygenated species.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.