Abstract
To avoid undesired polymerization and maximize the selectivity of alkyl levulinate from the acid-catalyzed conversion of biomass-derived furfuryl alcohol, the effects of catalyst and reaction parameters on the formations of humin and alkyl levulinate were investigated. The results show that Amberlyst 15, of moderate acidic strength, was more favorable for the selective conversion of furfuryl alcohol to alkyl levulinate, and heteropolyacids of strong acidic strength tended to promote furfuryl alcohol polymerization. Compared with water as a reaction medium, alcohol significantly lowered humin formation and enhanced the yield of the resulting products. The formations of humin and alkyl levulinate were both favored at high catalyst loadings and reaction temperatures. An augmentation in initial furfuryl alcohol concentration caused an increase in humin formation and a decrease in alkyl levulinate yield. A high alkyl levulinate yield of up to 94% (100% furfuryl alcohol conversion) was achieved at 110 °C for 4 h with 5 g/L Amberlyst 15 catalyst and an initial furfuryl alcohol concentration of 0.1 mol/L. At this point, about 5% furfuryl alcohol was polymerized to form the humin, and its polymerization occurred mainly during the initial reaction stage.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.