Formation of heavily boron-doped hydrogenated polycrystalline germanium thin films by co-sputtering for developing p + emitters of bottom cells

Abstract

Properties of heavily boron-doped hydrogenated polycrystalline germanium (Ge) films sputter-deposited on glass are investigated for developing p + emitters of the bottom cells of low cost monolithic tandem solar cells. The films were deposited and in-situ doped by co-sputtering Ge with boron at various power levels ( P B) in a mixture of argon and hydrogen at 500 °C, and then followed by a rapid thermal anneal process at 550 °C for 120 s or 600 °C for 60 s, respectively. The dependence of the structural properties of the films on the various boron incorporations as well as annealing conditions was explored by Raman and X-ray diffraction measurements. We find that the films as deposited at 500 °C are polycrystalline with strong (2 2 0) preferential orientation, which are normally of columnar structure, confirmed by cross-sectional transmission electron microscopy. Revealed by Hall measurements, a boron activation level of 6.24×10 19 atoms/cm 3, well above reported maximum solid solubility in crystalline Ge, was obtained in the as deposited film at P B=55 W. Annealing at 600 °C enhanced the concentration to 1.21×10 20 atoms/cm 3. A fact that boron hardly diffuses in Ge at temperatures below 800 °C makes the resultant material an excellent candidate for thin p + emitters of the bottom cells of monolithic tandem solar cells.