Formation of Distinct Soluble Microbial Products by Activated Sludge: Kinetic Analysis and Quantitative Determination

Abstract

Soluble microbial products (SMP) released by microorganisms in bioreactors are classified into two distinct groups according to their different chemical and degradation kinetics: utilization-associated products (UAP) and biomass-associated products (BAP). SMP are responsible for effluent chemical oxygen demand or for membrane fouling of membrane bioreactor. Here an effective and convenient approach, other than the complicated chemical methods or complex models, is developed to quantify the formation of UAP and BAP together with their kinetics in activated sludge process. In this approach, an integrated substrate utilization equation is developed and used to determine UAP and their production kinetics. On the basis of total SMP measurements, BAP formation is determined with an integrated BAP formation equation. The fraction of substrate electrons diverted to UAP, and the content of BAP derived from biomass can then be calculated. Dynamic quantification data are obtained for UAP and BAP separately and conveniently. The obtained kinetic parameters are found to be reasonable as they are generally bounded and comparable to the literature values. The validity of this approach is confirmed by independent SMP production tests in six different activated sludge systems, which demonstrates its applicability in a wide range of engineered system regarding SMP production. This work provides a widely applied approach to determine the formation of UAP and BAP conveniently, which may offer engineers with basis to optimize bioreactor operation to avoid a high effluent soluble organics from SMP or SMP-based membrane fouling in membrane bioreactors.