Abstract
AbstractAn in situ artificial micro‐pit fabrication method with an area selective electrochemical measurement technique was applied to investigate the effect of the geometry of artificially formed pits on their localized corrosion behavior in anodized 1000 series aluminum. This technique enables the fabrication of artificial micro‐pits with different aspect ratios (pit depth/pit diameter) in solutions. The aspect ratios of the fabricated artificial micro‐pits in this experiment could be varied from 0.13 to 1.83 by controlling the irradiation time of the focused pulsed YAG laser beam. By applying a constant potential to the final laser‐beam‐irradiated spot in chloride environments, localized dissolution occurred only at the laser beam irradiated area, because the anodic oxide film acted as an insulator. The corrosion current and charge increase with increasing aspect ratio at any applied potential. Copyright © 2010 John Wiley & Sons, Ltd.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
