Abstract
A Fire Occurred In A Residence That Was Being Utilized As A Day Care Center. All Parties Involved In The Initial Investigations Into The Fire Cause Agreed That The Fire Originated In The Laundry Room In The Vicinity Of The Electric Clothes Dryer. The Plaintiffs Expert Opined That The Dryer Was Defectively Designed And Hence Caused The Fire. This Writer Was Retained By The Manufacturer Of The Dryer And Asked To Determine The Most Probable Failure Mode And To Test An Exemplar Dryer In Order To Validate Those Observations. The Ignition Point Appeared To Be At A High Resistance Electrical Connection At The Dryer Heater Box Involving Both Copper And Steel. (See Figure 1) Initial Examination Of The Clothes Dryer At The Residence Revealed That The Dryer Heater Circuitry Connection Had Been Modified. One Of The Male Prongs Had Been Removed, The Insulating Material Stripped Back And The #10 Awg Stranded Copper Wire Was Partially Inserted And Held In Place By A Common Steel Wood Screw. (See Figure 2) The Conductor Strands And The Wood Screw Appeared Heavily Heat Stressed And Appeared To Be A Viable Ignition Source. A Few Inches Away Black Electrical Tape Was Deformed By Heat But Not Fully Combusted. (See Figure 3) This Connection Was Duplicated On An Exemplar Dryer Test Stand And Under Operating Conditions Ignited Lightweight Fabrics.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of the National Academy of Forensic Engineers
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
