Foreign object damage characteristics of a thin nickel-based superalloy plate at room and high temperatures

Abstract

Turbine blades with thin-walled structures usually works in harsh environments, and foreign object damage (FOD) is one of the conditions of special concern. In this paper, the FOD characteristics of thin nickel-based superalloy plates are studied by a combination of experimental, numerical and analytical methods, considering room and high temperatures, different impact conditions and plate thicknesses. An easy-to-use test system is developed to realize high speed impact of the thin nickel-based superalloy plate under elevated temperature. Crater morphologies, internal microstructure, and residual stress are analyzed after impact with different conditions. Numerical simulation of the impact process is performed by using Johnson-Cook (J-C) constitutive model. Based on Hertz theory, an analytical method for calculating the crater length and depth is proposed considering the deformation of the impact steel sphere. Results shows that the FOD characteristics at high temperature is significantly different from that at room temperature. The crater has lager dimensions under high speed and elevated temperature. Moreover, significant grain refinement is obvious and the dislocation layer is also thicker at higher speed and higher temperature. Due to the effect of high temperature softening, hardness and residual stress after impact with elevated temperature is lower than that at room temperature. Besides, non-normal impact mainly influences Goss texture and distribution of residual stress after high temperature impact. In addition, it is found that thickness have a significant effect on the FOD characteristics especially when the plate is thinner. The validity of the numerical model and analytical method is proved by comparing with the experimental results. The present study can provide data foundation and numerical analysis support for the damage assessment and maintenance of turbine blades.