Forced Response in Axial Turbines Under the Influence of Partial Admission

Abstract

High cycle fatigue (HCF) due to unforeseen excitation frequencies, underestimated force magnitudes, or a combination of both causes control-stage failures for steam turbine stakeholders. This paper provides an extended design criteria toolbox, as well as validation data, for control-stage design based on experimental data to reduce HCF incidents in partial-admission turbines. The upstream rotor in a two-stage air test turbine is instrumented with pressure transducers and strain gauges. Admission degrees extend from 28.6% to 100%, as one or two admission arcs are simulated by blocking segmental arcs immediately upstream of the first stator vanes with aerodynamically shaped filling blocks. Sweeps across a speed range of 50%–105% of design speed are performed at a constant turbine pressure ratio during simultaneous high-speed acquisition. A forced-response analysis is performed and results presented in Campbell diagrams. Partial admission creates a large number of low-engine-order forced responses because of the blockage, pumping, loading, and unloading processes. Combinations of the number of rotor blades and low-engine-order excitations are the principal sources of forced-response vibrations for the turbine studied here. Altering the stator and/or rotor pitches changes the excitation pattern. We observed that a relationship between the circumferential lengths of the admitted and nonadmitted arcs dictates the excitation forces and may serve as a design parameter.