Abstract
The magnetic suspension densimeter (MSD) is a sophisticated, state-of-the-art device that provides extremely accurate results for density measurements. The MSD uses a magnetic technique to couple a mass inside a measurement cell with an external mass balance for mass measurement. This article presents a force transmission error (FTE) analysis for a high-pressure, single-sinker MSD. Due to the magnetic working principle of the apparatus, magnetic properties of the high-pressure cell and external magnetic fields affect the measurements slightly. For the analysis, McLinden et al. suggest making measurements using two different sinkers, a titanium sinker and a copper sinker, having the same mass. The measurements cover densities for methane, ethane, carbon dioxide and nitrogen over the temperature range from 265 K to 450 K (±5 mK stability) up to 180 MPa (uncertainty of 0.01 % full scale: 200 MPa). Comparing and manipulating the measurements permit determination of apparatus and fluid specific effects that contribute to the FTE. For this MSD, the apparatus effect is about 200 ppm, which effectively masks any fluid specific effect. A comprehensive analysis of the FTE produces a uniform deviation for density values of about 0.05 % at 2σ across the full range of pressure.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
