Abstract
Recently, foldable electronics technology has become the focus of both academic and industrial research. The foldable device technology is distinct from flexible technology, as foldable devices have to withstand severe mechanical stresses such as those caused by an extremely small bending radius of 0.5 mm. To realize foldable devices, transparent conductors must exhibit outstanding mechanical resilience, for which they must be micrometer‐thin, and the conducting material must be embedded into a substrate. Here, single‐walled carbon nanotubes (CNTs)–polyimide (PI) composite film with a thickness of 7 µm is synthesized and used as a foldable transparent conductor in perovskite solar cells (PSCs). During the high‐temperature curing of the CNTs‐embedded PI conductor, the CNTs are stably and strongly p‐doped using MoOx, resulting in enhanced conductivity and hole transportability. The ultrathin foldable transparent conductor exhibits a sheet resistance of 82 Ω sq.−1 and transmittance of 80% at 700 nm, with a maximum‐power‐point‐tracking‐output of 15.2% when made into a foldable solar cell. The foldable solar cells can withstand more than 10 000 folding cycles with a folding radius of 0.5 mm. Such mechanically resilient PSCs are unprecedented; further, they exhibit the best performance among the carbon‐nanotube‐transparent‐electrode‐based flexible solar cells.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Advanced science (Weinheim, Baden-Wurttemberg, Germany)
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.