Focus on lasers and optics

Abstract

The descriptions of the new products listed in this section are based on information supplied to us by the manufacturers. Physics Today can assume no responsibility for their accuracy. For more information about a particular product, visit the website at the end of the product description. Diode laser modulesSection:ChooseTop of pageDiode laser modules <<Cold-processing picosecon...Industrial excimer laser ...Quantum cascade laser dio...High-power yellow laser488-nm CW laserQuasi-CW laser arraysLaser-beam profiling came...Ultrafast laser systemGreen laser for mobile pr...Fiber laser modulesCooler for laser diodesKit for projection displa...Light engines and arraysParticle characterization...New literatureTwo new diode laser series developed by nLight incorporate the company’s nXLT single emitters and are combined with a proprietary optical design for efficient fiber coupling and capable of either CW or pulsed operation. The Pearl high-power modules deliver up to 100 W from a 400- or 600-μm fiber at wavelengths of 808, 880, or 980 nm and up to 7 W from a 400-μm fiber or afocal at 639 nm. The high-brightness series offers up to 40 W from a 200-μm fiber at 808, 915, or 980 nm. Both series include greater than 50% wall plug efficiency and use nDure fiber. They have been designed to meet the requirements of laser pumping and materials-processing applications; diode-based laser systems are accelerating the rate at which they are displacing gas-based laser and nonlaser systems for such applications as welding, cutting, soldering, and heat treating. nLight, 5408 NE 88th Street, Building E, Vancouver, WA 98665, http://www.nlight.net See www.pt.ims.ca/16300-131 Cold-processing picosecond laserSection:ChooseTop of pageDiode laser modulesCold-processing picosecon... <<Industrial excimer laser ...Quantum cascade laser dio...High-power yellow laser488-nm CW laserQuasi-CW laser arraysLaser-beam profiling came...Ultrafast laser systemGreen laser for mobile pr...Fiber laser modulesCooler for laser diodesKit for projection displa...Light engines and arraysParticle characterization...New literatureRPMC has introduced the HYPER RAPID, a new industrial cold-processing picosecond laser that provides up to 50 W TEM 00 average power and pulse repetition rates up to 1 MHz. The device, designed for high-quality industrial micromachining, can produce a cold ablation of more than 10 mm3 of material per minute, with minimum thermal side effects; there are virtually no heat-affected zones, no cracks, and no burrs at the free edges. The lateral resolution for the machining is in the micrometer range with a depth control of about 10 nm. Four versions of the company’s RAPID laser are now available: 2.5, 10, 25, and 50 W. A picosecond laser beam can be focused to a diameter of a few μm, and each controllable single pulse will remove coldly only about a 10-nm layer of materials used in the semiconductor, aerospace, and automotive industries. RPMC, 203 Joseph Street, O’Fallon, MO 63366, http://www.rpmclasers.com See www.pt.ims.ca/16300-132 Industrial excimer laser baseSection:ChooseTop of pageDiode laser modulesCold-processing picosecon...Industrial excimer laser ... <<Quantum cascade laser dio...High-power yellow laser488-nm CW laserQuasi-CW laser arraysLaser-beam profiling came...Ultrafast laser systemGreen laser for mobile pr...Fiber laser modulesCooler for laser diodesKit for projection displa...Light engines and arraysParticle characterization...New literatureJ P Sercel Associates has announced the industrial excimer laser base, a self-contained base that integrates a gas-handling system and a utility system. The product provides portability for an excimer laser system and its gas supply. It allows users to ship and set up the laser without expensive laboratory plant gas and ventilation system installations and enables it to move to different experiments such as remote sensing and applications dedicated to specific processes. The laser base is available with options such as an integrated cooling system, activated carbon air filtration, and advanced software. Excimer lasers provide the highest power levels of all UV lasers for materials processing. The laser base is ideal for use with the Coherent (Santa Clara, California) LPXPro excimer laser (see photo). J P Sercel Associates Inc, 220 Hackett Hill Road, Manchester, NH 03102, http://www.jpsalaser.com See www.pt.ims.ca/16300-133 Quantum cascade laser diodes Section:ChooseTop of pageDiode laser modulesCold-processing picosecon...Industrial excimer laser ...Quantum cascade laser dio... <<High-power yellow laser488-nm CW laserQuasi-CW laser arraysLaser-beam profiling came...Ultrafast laser systemGreen laser for mobile pr...Fiber laser modulesCooler for laser diodesKit for projection displa...Light engines and arraysParticle characterization...New literatureNanoplus GmbH has expanded its range of single-mode DFB-QCL quantum cascade laser diodes up to a wavelength of 2.7 μm. Designed for tunable diode laser spectroscopy, the new devices allow access to higher absorption levels in the near-IR range, especially for the fundamental rotational-vibrational mode of water that leads to strong absorption lines in the region from about 2.4 to 3.0 μm. For bipolar quantum cascade lasers, restrictions on long wavelength operation are relaxed, a design discovered by Lucent Technologies and licensed to nanoplus. The 2.7-μm diodes operate at room temperature in the CW mode with an output power of several milliwatts. The laser line can be tuned by current (0.025 nm/mA) or temperature (0.21 nm/°C); typical side-mode suppression rates of the units are greater than 30 dB. nanoplus GmbH, Oberer Kirschberg 4, D-97218 Gerbrunn, Germany, http://www.nanoplus.com See www.pt.ims.ca/16300-134 High-power yellow laserSection:ChooseTop of pageDiode laser modulesCold-processing picosecon...Industrial excimer laser ...Quantum cascade laser dio...High-power yellow laser <<488-nm CW laserQuasi-CW laser arraysLaser-beam profiling came...Ultrafast laser systemGreen laser for mobile pr...Fiber laser modulesCooler for laser diodesKit for projection displa...Light engines and arraysParticle characterization...New literatureCoherent claims that its Compass 561-50 laser, which delivers 50 mW at a wavelength of 561 nm, offers lower noise than any other solid-state yellow laser currently available. The frequency-doubled, diode-pumped laser has a noise specification of 0.25% rms from 10 Hz to 1 GHz, excellent beam characteristics (M2 less than 1.2), and a beam-pointing stability of less than 6 μrad/°C. The laser uses the company’s PermAlign construction to achieve high reliability and long lifetime and has the same form, fit, and function as the previous generation of the Compass 561-nm and 532-nm series. The new laser’s 561-nm output is optimum for exciting several key fluorophores, such as the rhodamine series and Alexa Fluor dyes, and provides better separation between excitation and fluorescence than a 532-nm output. Coherent Inc, 5100 Patrick Henry Drive, Santa Clara, CA 95054, http://www.coherent.com See www.pt.ims.ca/16300-135 488-nm CW laserSection:ChooseTop of pageDiode laser modulesCold-processing picosecon...Industrial excimer laser ...Quantum cascade laser dio...High-power yellow laser488-nm CW laser <<Quasi-CW laser arraysLaser-beam profiling came...Ultrafast laser systemGreen laser for mobile pr...Fiber laser modulesCooler for laser diodesKit for projection displa...Light engines and arraysParticle characterization...New literatureThe Cyan Scientific laser from Newport Corp is a CW device with an output of 488 ± 0.5 nm wavelength and an output power of 10, 20, 40, or 50 W. It emits an optical beam in a single spatial mode—M2 less than 1.1—which allows for tight focusing and uniform sample illumination. With an active power control system, the Cyan Scientific laser is able to start up quickly and locks output power over the entire operating temperature range, providing power stability better than 1%. The laser’s true single-frequency operation (a linewidth of less than 1 MHz) is ideal for Raman spectroscopy, interferometry, and other applications that require high coherence and spectral stability. Even at the highest output power, the system draws less than 15 W, a low power consumption that eliminates the need for large heat sinks and cooling mechanisms. Newport Corporation, Spectra-Physics Lasers Division, 1335 Terra Bella Avenue, Mountain View, CA 94039, http://www.newport.com See www.pt.ims.ca/16300-136 Quasi-CW laser arrays Section:ChooseTop of pageDiode laser modulesCold-processing picosecon...Industrial excimer laser ...Quantum cascade laser dio...High-power yellow laser488-nm CW laserQuasi-CW laser arrays <<Laser-beam profiling came...Ultrafast laser systemGreen laser for mobile pr...Fiber laser modulesCooler for laser diodesKit for projection displa...Light engines and arraysParticle characterization...New literatureIntense Ltd is offering an expansion of the Hermes family of high-power quasi-CW laser arrays that combine high reliability with modular packaging in a standard wavelength of 808 nm and power levels up to 900 W; they degrade by less than 5% over 2 × 108 shots. The stacked arrays use the company’s quantum-well intermixing technology, a process that increases the quantum-well bandgap of a semiconductor laser in a controlled and precise manner. Thus active and passive sections can be created in the same laser cavity, which results in superior power and unrivaled brightness. The Hermes QCW arrays come as vertically or horizontally stacked assemblies of up to 10 bars, with lensed and unlensed options. Standard configurations include 360, 540, 720, and 900 W peak output powers; other wavelengths are available on request. Intense Ltd, 1200A Airport Road, North Brunswick, NJ 08902, http://www.intenseco.com See www.pt.ims.ca/16300-137 Laser-beam profiling cameras Section:ChooseTop of pageDiode laser modulesCold-processing picosecon...Industrial excimer laser ...Quantum cascade laser dio...High-power yellow laser488-nm CW laserQuasi-CW laser arraysLaser-beam profiling came... <<Ultrafast laser systemGreen laser for mobile pr...Fiber laser modulesCooler for laser diodesKit for projection displa...Light engines and arraysParticle characterization...New literatureOphir-Spiricon’s two new USB 2.0 silicon CCD cameras are designed for laser-beam profiling measurement applications. The SP503U and SP620U units, both CW and pulsed modes, accurately capture and analyze wavelengths from 190 to 1550 nm. The cameras feature a high dynamic range of 64 dB and a programmable, high-speed electronic shutter. With photodiode trigger and pretrigger circuitry, the units synchronize effortlessly with even nanosecond-pulse lasers. The SP503U has a resolution of 640 × 480 pixels; the SP620U, with 1600 × 1200 pixels, offers more than 1.9 million pixels. Both cameras include a set of filters that when used in combination with the automatic shutter and gain controls allow measurement of power levels from microwatts to watts. Users have a choice between the company’s LBA or BeamStar software packages. Ophir-Spiricon Inc, 60 West 1000 North, Logan, UT 84321, http://www.ophir-spiricon.com See www.pt.ims.ca/16300-138 Ultrafast laser system Section:ChooseTop of pageDiode laser modulesCold-processing picosecon...Industrial excimer laser ...Quantum cascade laser dio...High-power yellow laser488-nm CW laserQuasi-CW laser arraysLaser-beam profiling came...Ultrafast laser system <<Green laser for mobile pr...Fiber laser modulesCooler for laser diodesKit for projection displa...Light engines and arraysParticle characterization...New literatureFEMTOLASERS Produktions has introduced the FEMTOSOURCE scientific XL 500, a laser system with a center wavelength of 800 nm, an output level exceeding 0.5 μJ, a pulse duration of less than 50 fs, and a repetition rate of greater than 5 MHz. The result is a peak power of greater than 10 MW and an average power level of more than 2.5 W; the laser head is temperature-stabilized. The new product combines the advantages of both the company’s dispersive mirror technology and its chirped pulse oscillator technology and represents a crossover between ultrafast oscillators and ultrafast amplifier systems. Applications for the scientific XL 500 include materials processing, terahertz generation, and spectroscopy for which high peak power, stability, and reliability are advantageous. FEMTOLASERS Produktions GmbH, Fernkorngasse 10, 1100 Vienna, Austria, http://www.femtolasers.com See www.pt.ims.ca/16300-139 Green laser for mobile projectionSection:ChooseTop of pageDiode laser modulesCold-processing picosecon...Industrial excimer laser ...Quantum cascade laser dio...High-power yellow laser488-nm CW laserQuasi-CW laser arraysLaser-beam profiling came...Ultrafast laser systemGreen laser for mobile pr... <<Fiber laser modulesCooler for laser diodesKit for projection displa...Light engines and arraysParticle characterization...New literatureEagleyard Photonics has demonstrated a directly modulated green laser source with an output power in excess of 20 mW. The green laser is a key component, up to now unavailable, for projection displays on mobile phones, personal digital assistants, and game consoles. The design is based on a gallium arsenide laser diode that emits nonvisible IR laser radiation and a frequency doubling crystal that converts the IR directly into visible green. The technology involves a semiconductor chip that allows direct modulation at video rates, a stable wavelength to match the doubling crystal, and high output power for efficient projection brightness. The laser driver is capable of data rates up to 450 megabits/s and modulated currents up to 1.5 A. eagleyard Photonics GmbH, Rudower Chaussee 29, 12489 Berlin, Germany, http://www.eagleyard.com See www.pt.ims.ca/16300-140 Fiber laser modulesSection:ChooseTop of pageDiode laser modulesCold-processing picosecon...Industrial excimer laser ...Quantum cascade laser dio...High-power yellow laser488-nm CW laserQuasi-CW laser arraysLaser-beam profiling came...Ultrafast laser systemGreen laser for mobile pr...Fiber laser modules <<Cooler for laser diodesKit for projection displa...Light engines and arraysParticle characterization...New literatureQPC Lasers has developed the Bright-lock Ultra-500 series of semiconductor lasers, which can produce 75 W and 180 W of output power at a center wavelength of 976 nm with spectral widths of less than 2 nm and 3 nm, respectively. Other units deliver 35 W and 90 W at 1532 nm with spectral widths of 2 nm and 4 nm; fiber core diameters range from 200 to 400 μm with a nominal numerical aperture of 0.22. The modules feature cladding-free power, internal gratings for higher spectral brightness and wavelength stabilization, and a water-cooled plate with standard unfiltered water. Detachable fiber and dichroic filters are available. Applications for the units include pumping of fiber lasers and solid-state lasers; materials processing such as soldering, welding, and engraving; and uses in the medical and defense fields. QPC Lasers Inc, 15632 Roxford Street, Sylmar, CA 91342, http://www.qpclasers.com See www.pt.ims.ca/16300-141 Cooler for laser diodes Section:ChooseTop of pageDiode laser modulesCold-processing picosecon...Industrial excimer laser ...Quantum cascade laser dio...High-power yellow laser488-nm CW laserQuasi-CW laser arraysLaser-beam profiling came...Ultrafast laser systemGreen laser for mobile pr...Fiber laser modulesCooler for laser diodes <<Kit for projection displa...Light engines and arraysParticle characterization...New literatureThe UPF Optocooler from Nextreme Thermal Solutions, when embedded in a laser diode package, can pump a heat density up to 78 W/cm2 to maintain the diode’s optimal operating conditions and performance. A low-power laser diode might generate as little as 0.09 W of power, but since the device’s size is only about 300 × 200 μm, this means the diode is producing about 150 W/cm2. Even if that power is spread by a factor of 30, it still falls outside the operating regime of a typical bulk thermoelectric cooler. A thin-film TEC can pump more heat and be made much smaller than a conventional TEC. The UPF Optocooler can remove a maximum of 420 mW at 25 °C ambient in a footprint of only 0.55 mm2. At 85 °C, the module can pump a heat density up to 112 W/cm2 or cool up to 60 °C. Nextreme Thermal Solutions Inc, 3908 Patriot Drive, Suite 140, Durham, NC 27703-8031, http://www.nextreme.com See www.pt.ims.ca/16300-142 Kit for projection display applicationsSection:ChooseTop of pageDiode laser modulesCold-processing picosecon...Industrial excimer laser ...Quantum cascade laser dio...High-power yellow laser488-nm CW laserQuasi-CW laser arraysLaser-beam profiling came...Ultrafast laser systemGreen laser for mobile pr...Fiber laser modulesCooler for laser diodesKit for projection displa... <<Light engines and arraysParticle characterization...New literatureAgilent Technologies has released the RBG Laser Combiner Developer’s Kit. Created for projection system designers, the kit is based on the company’s complex monolithic optics technology, which offers superior alignment throughout a product’s lifetime because the optics are bonded together into a single prealigned structure. As a result, they do not drift out of alignment due to vibration or room temperature fluctuations, thus maintaining a clear, infocus image. Fewer optical surfaces decrease environmental contamination that can cause on-screen interference. The kit can be used with various image panels and features color coordinates that can be white-balanced for screen optimization. Agilent Technologies Inc, 5301 Stevens Creek Boulevard, Santa Clara, CA 95051, http://www.agilent.com See www.pt.ims.ca/16300-143 Light engines and arraysSection:ChooseTop of pageDiode laser modulesCold-processing picosecon...Industrial excimer laser ...Quantum cascade laser dio...High-power yellow laser488-nm CW laserQuasi-CW laser arraysLaser-beam profiling came...Ultrafast laser systemGreen laser for mobile pr...Fiber laser modulesCooler for laser diodesKit for projection displa...Light engines and arrays <<Particle characterization...New literatureEnfis has announced the QUATTRO Mini, a high-power, extremely bright, cost-effective spot source that produces up to 160 W in a 2 × 2 cm array. The company’s technology ensures that colors are mixed evenly and effectively, giving a homogeneous spot of light rather than a cluster of different colors provided by conventional LED solutions. Three optimized multichannel variants are offered: RGBA provides an extra-large color gamut; RGBW delivers RGB color mixing with the addition of a white channel to give a higher maximum lumen capability; and Hi-CRI Vari-CCT enables one device to provide a high-quality light source with a range of color temperatures from 3000 to 6500 K. The QUATTRO Mini incorporates built-in optical feedback at the array level. Enfis Ltd, Technium 2, Kings Road, Swansea Waterfront, Swansea SA1 8PJ, UK, http://www.enfis.com See www.pt.ims.ca/16300-144 Particle characterization system Section:ChooseTop of pageDiode laser modulesCold-processing picosecon...Industrial excimer laser ...Quantum cascade laser dio...High-power yellow laser488-nm CW laserQuasi-CW laser arraysLaser-beam profiling came...Ultrafast laser systemGreen laser for mobile pr...Fiber laser modulesCooler for laser diodesKit for projection displa...Light engines and arraysParticle characterization... <<New literatureMalvern Instruments has announced the Morphologi G3 automated particle characterization system. The new tool delivers high-quality statistically significant particle size and shape information and microscope-quality images through the rapid analysis of hundreds of thousands of particles. An integrated, software-controlled dry powder dispersion system reduces preparation times and enables the reliable measurement of dry powders. The sample is dispersed with an instantaneous pulse of compressed air; precise control of dispersion pressure, injection time, and settling time is maintained. Measurements with the Morphologi G3 are made in an enclosed sample carrier, minimizing environmental exposure and ensuring safe material handling. Malvern Instruments Inc, 117 Flanders Road, Westborough, MA 01581-1042, http://www.malvern.com See www.pt.ims.ca/16300-145 New literatureSection:ChooseTop of pageDiode laser modulesCold-processing picosecon...Industrial excimer laser ...Quantum cascade laser dio...High-power yellow laser488-nm CW laserQuasi-CW laser arraysLaser-beam profiling came...Ultrafast laser systemGreen laser for mobile pr...Fiber laser modulesCooler for laser diodesKit for projection displa...Light engines and arraysParticle characterization...New literature <<Jenoptik Laserdiode has published its Optical Infrared Components Product Portfolio. In addition to listing systems and components, the brochure provides a table with data on key optical materials used in IR technology, such as germanium, zinc sulfide, silicon, and calcium fluoride. Jenoptik Laserdiode GmbH, Goeschwitzer Strasse 29, 07745 Jena, Germany, http://www.jenoptik.com See www.pt.ims.ca/16300-146 © 2008 American Institute of Physics.