Foam in Porous Media: Characteristics and Potential Applications

Abstract

Abstract A laboratory study was made of the variables which affect the generation, propagation, quality und nature of foam produced inside a porous medium. It is shown that foam can be generated and propagated in porous media representative of reservoir rocks at pressure levels ranging from atmospheric to 1,000 psig, and under pressure differentials ranging from 1.0 to 50 psi/ft. The quality of foam depends on the type of foaming agent, the concentration of foaming solution, the physical properties of the porous medium, the pressure level, and the composition and saturation of fluids present. The nature of foam depends upon the type of foaming agent and its concentration in the foaming solution. The study shows that the flow behavior of foam in a porous medium is a complex one which cannot he correctly described in terms of the high apparent viscosity of foam. Also, the concept of relative permeability is not applicable to the flow of foam due to the associative nature of its components. On the basis of the discussed characteristics of foam, several applications of foam are suggested in oil recovery processes.