Fly ash based geopolymeric foams using silica fume as pore generation agent. Physical, mechanical and acoustic properties

Abstract

The aim of this work is the development of a porous geopolymeric foam with sound absorbing properties using silica fume as the pore generation agent. The samples were manufactured using a coal combustion fly ash as source material for the geopolymerization reaction, an alkaline solution as activating solution and silica fume as pore forming agent. Three parameters were studied: silica fume proportion (0, 20 and 40 wt%), activating solution (potassium silicate and potassium hydroxide) and setting temperature (40 and 70 °C). Once the samples were prepared, the experimental study of the most important physical, mechanical and acoustic features were carried out. The increase in the proportion of silica fume in the mixture and setting temperature produced a reduction in setting time and a raise of open void porosity, reducing the compressive strength at 28 days up to a half but increasing the sound absorption. The influence of activating solution in open porosity and sound absorbing properties was not very important.