Flutter, Galloping, and Vortex-Induced Vibrations of H-Section Hangers

Abstract

AbstractHangers in arch bridges and other long vertical bars in truss bridges are typically slender members and often adopt an aerodynamically unfavorable H-section due to the conveniences in manufacture, construction, and maintenance. In contrast to the very narrow range of wind attack angles of horizontal members, hangers may suffer wider wind attack angles, possibly from 0° to 360°, and are therefore more prone to wind-induced vibrations. In August 2006, large torsional vibration with severe damage was observed on the 13 longest hangers of the Dongping arch bridge in China during a strong wind. While vibrations of hangers were usually caused by galloping, and vortex shedding excitation, the present case was likely to be a kind of torsional flutter instability. Therefore an in-depth investigation on the hangers’ aerodynamic performances in forms of flutter, galloping, and vortex shedding has been conducted through a series of wind tunnel tests. First, with section model and aeroelastic models tests of t...