Flutter characteristics of a sheet with an elastic support in three-dimensional uniform flow

Abstract

In the manufacturing processes of thin flexible plates (sheets) such as polarizing films, the flutter can be caused to the sheets due to the interaction between the motion of the sheets and fluid flow. Then, the flutter can cause serious damage to the sheets, leading to the wrinkles and scratches. Thus, it is crucial to investigate a detailed characteristics and excitation mechanism of the flutter. In the present study, a detailed flutter characteristics and excitation mechanism of a rectangular sheet with an elastic support is investigated. The elastic support is implemented using a fine flexible wire. The influence of bending stiffness of the support section on the flutter velocity and frequency is clarified through wind-tunnel experiments and numerical analysis. Moreover, the work done by the fluid force on the sheet surface was determined.The flutter velocity and frequency drastically decrease owing to decrease in bending stiffness of the support section regardless of the aspect and mass ratio. Then, the positive work region around the leading edge of the sheet expands owing to the large-amplitude oscillation around the leading edge. The expansion of positive work region owing to a large-amplitude oscillation around the leading edge of the sheet destabilizes the system.