Abstract
The advancement of nanogenerators (NGs) enables self-powered wearable devices to respond to environmental parameters, which encourages new application scenarios to be explored. In the work, an immersion-type triboelectric NG (TENG) is fabricated to harvest mechanical energy from running water and acts as a novel self-powered water-speed sensor by fluorinated graphite paper (FGP). The oscillograms of output currents driven by flowing water are comprised of major direct current (DC) and minor alternative current (AC) signals. The DC signals are attributed to tribovoltaic mechanisms between the FGP and water, and the AC signals are attributed to triboelectric mechanisms between the FGP and ions in water, testified by subsequent experiments in NaCl(aq). The FGP-water TENG demonstrates the output current density and voltage of 3.3 μA/cm2 and 65 mV at a water speed of 4.2 cm/sec, showing 84 and 14-fold enhancements, respectively, compared with the GP-water TENG. The sensing of water speed by using the output current of the FGP-water TENG shows a linear calibration curve with R2 larger than 0.99. In addition to water speed sensing, bubble sensing in an aquarium, and energy harvesting in dynamic water by ultrasound are also demonstrated by the FGP-based device. The new applications and mechanisms involved in the work provide new insights into the triboelectric and tribovoltaic mechanisms in water and novel ideas to monitor and utilize water resources.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.