Fluidization of moist sawdust in binary particle systems in a gas–solid fluidized bed

Abstract

The fluidized behavior of binary mixtures of moist sawdust and glass spheres has been investigated. The sawdust alone was observed to fluidize poorly, with extensive channelling occurring. The addition of 0.322 and 0.516 mm glass spheres to the fluidized bed of sawdust improved the fluidization characteristics. The mixtures of sawdust and 0.322 mm spheres were completely mixed when fluidized. Mixtures of sawdust and 0.516 mm spheres were either partially or completely mixed, depending upon gas velocity in the fluidized bed. As the moisture content of the sawdust was increased, the minimum fluidization velocity of the binary mixture also increased. There was an upper limit to the moisture content of the sawdust at which fluidization could be achieved. When the moisture content of the sawdust exceeded 33 and 54 wt% on a dry basis, agglomeration and channelling occurred in the mixtures of sawdust and glass spheres, with sizes 0.322 and 0.516 mm, respectively. The moisture likely contributes to interparticle liquid bridging forces. Binary mixtures of larger 0.777 and 1.042 mm glass spheres and up to 82% moisture sawdust did not readily agglomerate, but the two components completely segregated during fluidization.