Abstract
Various grades of manganese dioxide ores, as a natural recyclable sorbent, can be used in dry flue gas desulfurization (FGD) at moderate temperatures (350–450 °C). This research provided low- and high-grade manganese dioxide ores to examine SO2 removal in a packed bed reactor. To obtain characteristic parameters of mineral sorbents, XRD, XRF, BET, and mercury porosimetry were employed. Then, kinetic parameters of desulfurization reaction were determined using thermogravimeter analyzer (TGA) and random pore model (RPM) for a single pellet. In desulfurization experiments of simulated flue gas in a packed bed reactor and mass spectrometer (MS) apparatus, the breakthrough times were measured under various operating conditions. The onset of these breakthrough times or life-time of MnO2 reactor for the SO2 removal was predicted successfully by RPM for a packed bed reactor using related kinetic constants from TGA. In addition, reacted sorbets were recycled multiple times after washing with water. Not only does this simple method separate MnSO4 from unreacted sorbents as a valuable byproduct to reduce the FGD cost, but it also improves pore size distribution (PSD) of mineral MnO2 by creating large pores. Modified PSD of this recycled sorbent caused increased breakthrough time.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.