Abstract

An experimental study has been carried out to investigate the nature of transients in vacuum ejector flows during start-up and the dynamics in flow characteristics. The results show that the secondary stream induction progresses with non-uniform rates with the ramping primary jet pressure during start-up. The initial evacuation period is subjected to gradual and highly perturbed secondary fluid entrainment. In this phase, the secondary stream induction by the shear layer is asymmetric leading to an un-even vacuum generation in the secondary chamber. In the second phase, the secondary pressure fluctuations are found to be ceased for a critical primary jet pressure followed by a rapid induction of the secondary fluid till the primary jet expands to the diffuser wall. The transition from the first phase to the second phase is caused by the secondary stream flow choking in the diffuser. Following the second phase, a stable stage exists in the third phase in which the vacuum pressure decreases only marginally. Any further attempt to increase the secondary chamber vacuum level beyond the third phase, by increasing the primary jet total pressure, results in flow reversal into the secondary chamber, spoiling the already achieved vacuum level. In the fourth phase of start-up, a complicated shock interaction transformation from a Mach reflection (MR) to regular reflection (RR) occurs within the diffuser. It is also observed that the primary jet pressures for the minimum secondary chamber pressure, the minimum secondary pressure, and the primary pressure for MR-RR transformation decrease initially with increase in diffuser length and then increase. It is found that the decreasing and increasing trends are caused by the pressure recovery and Fanno effects, respectively.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.