Abstract
In this study, numerical simulations are performed to investigate the effect of the dimple/protrusion depth on the flow structure and heat transfer characteristics in a 90-deg turned channel with pin fins. The pin fins and dimple/protrusion are arranged on the endwall surface with staggered layout. Five different dimples/protrusions depth-to-diameter ratios are investigated, i.e., δdd=0,0.1,0.2,0.3,0.4. The Reynolds number ranges from 8500 and 60,000. Results of the flow structure, heat transfer on the endwall surface and friction factor are investigated in this study. Results indicate that the dimple/protrusion depth has a remarkable influence on the flow structure and heat transfer. The horseshoe vortex generated by the pin fin is decreased while the impingement effect within the dimple is increased as the dimple depth increased. In a pin fin channel with protrusion, a new horseshoe vortex which causes a high Nusselt number near the endwall is induced after adoption the protrusion. The higher protrusion depth induces a higher Nusselt number. It is also found that the volume goodness factor is increased after adoption the dimple/protrusion compared to pure pin fin channel.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
