Abstract
Monolithic composites of Polyphepan® or Kraft lignin embedded in a poly(vinyl alcohol) (PVA) matrix were synthesized using cryogelation technique and studied as flow permeable adsorbents for bisphenol A and erythromycin removal from water. Adsorption isotherms of bisphenol A on pristine Polyphepan provided the equilibrium dissociation constant KL=2.6×10−6M and the maximal binding capacity Qmax=20μmol/g; for erythromycin KL was in the 9.6×10−6M to 5.8×10−5M range, and Qmax was between 55μmol/g and 94μmol/g. Embedment of lignins into PVA cryogels resulted in monoliths with adequate flow permeability and the composites essentially retained the binding capacity for both bisphenol A and erythromycin. Percolation of contaminated water through the monoliths resulted in 10-fold reduction of the pollutant concentrations within 12–70 column volumes of the effluent. Due to the higher loading of lignin, the Kraft lignin–PVA composite showed higher adsorption capacity for erythromycin than Polyphepan–PVA. Stability and reversible compression of the monoliths in the flow of water were studied. Limitations are associated with leakage of soluble lignin, strongly expressed in the case of Kraft lignin-containing composites.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.