Abstract
Two-phase flow pattern transition during the condensation of R134a and R1234ze(E) was experimentally investigated in a microchannel array made of borosilicate glass cooled symmetrically on the top and bottom by forced convection of water. The microchannel array consisted of 50 channels with the aspect ratio of 2.46, the hydraulic diameter of 301.6μm and the length of 50mm. Saturation temperatures are 20–25°C with mass fluxes varying from 6 to 50kg/m2/s. Observed patterns are annular flow, steady injection flow, quasi-symmetric wave flow and slug/bubbly flow. In addition, three flow pattern transition modes including steady injection, wave-coalescence injection, and liquid bridging were observed and mapped in terms of liquid Webb number versus condensation number. The steady injection transition was more studied in detail by measuring the bubble length variation and the moving velocity of bubbles and slugs with different mass fluxes of R134a and R1234ze(E). The transition mechanism of injection flow was identified by analyzing the force balance based on the experimental results. The flow pattern transition locations and frequencies were measured and compared with the prediction correlations in the previous investigations.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
