Abstract
A video imagery technique for making flow measurements in streams and waterways is presented and used to estimate discharge for Clear Creek near Oxford, Iowa. A video camera was used to visualize the flow seeded with tracers. Measurements of free surface flow velocities were then made using particle image velocimetry (PIV) techniques. The velocity measurements were used as input to a hydraulic model, which uses kinematic principles (conservation of mass) to derive three‐dimensional flow fields for discharge estimation. A survey of five channel cross sections over a 7.15 m length of stream were made to define the channel bathymetry for the hydraulic model. The average channel width was 5.7 m, and the average depth was 0.2 m. The discharge estimate using the video technique (0.183 m3/s) compares well with the current meter discharge measurement (0.192 m3/s with an estimated standard error of 6.4%). The root‐mean square difference of the depth‐averaged velocity at the locations of the current meter measurements was 0.032 m/s. Potential applications of the video imagery technique include measurements of flood flows at ungaged sites, river monitoring from a remote site, and estimation of two‐ and three‐dimensional flow components.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.