Flow injection micelle-mediated methodology for determination of lead by electrothermal atomic absorption spectrometry

Abstract

A simple and sensitive flow injection micelle-mediated method was developed for the determination of trace Pb by electrothermal atomic absorption spectrometric (ET-AAS). The formation of the analyte-entrapped surfactant micelles by online merging of the analyte solution with O,O-diethyldithiophosphate solution and Triton X-114 solution sequentially, the adsorption of the resultant analyte-entrapped surfactant micelles onto a microcolumn packed with silica gel. The adsorbed analyte was then eluted with methanol and determined by ET-AAS. With consumption of 6.0 mL sample solution, a detection limit of 0.016 µg L−1, and a concentration factor of 21.6 were obtained at a sample throughput of 20 h−1. The relative standard deviation was 5.1% (c = 2.0 ng mL−1, n = 7). The method has been successfully applied to the analysis of trace Pb in water sample with recoveries ranging from 94.0 to 99.0%. The certified reference material was also analyzed for validation, and the determined value obtained was in good agreement with the certified value.