Flow-induced noise control behind bluff bodies with various leading edges using the surface perturbation technique

Abstract

The present paper is devoted to an investigation on the flow-induced noise control downstream of bluff bodies with various leading edges using the surface perturbation technique. Four typical leading edges used in various engineering applications were studied in this work: the semi-circular, square, 30° symmetric trapezoid and 30° asymmetric trapezoid leading edges. The surface perturbation was created by piezo-ceramic actuators embedded underneath the surface of a bluff body placed in a cross flow. To suppress the flow-induced noise downstream bluff bodies with those leading edges, the surface perturbation technique was implemented. Based on the experiments, a noise reduction in the duct of more than 14.0dB has been achieved for all leading-edge cases. These results indicated that the vortex shedding and its flow-induced noise have been successfully suppressed by the proposed control scheme. The flow structure alteration around the bluff bodies and the shear layer shift phenomenon observed on the trailing edges were then investigated for interpreting the control mechanism for this flow-induced noise suppression, which were based on the vortex shedding strength suppression and vortex shedding frequency shift phenomenon. The effective control position for various leading edges was also studied for developing optimal control strategies for practical engineering applications.