Abstract
After centuries of striving for structural rigidity, engineers and scientists alike are increasingly looking to harness the deformation, buckling, and failure of soft materials for functionality. In fluidic devices, soft deformable components that respond to the flow have the advantage of being passive; they do not require external actuation. Harnessing flow-induced deformation for passive functionality provides a means of developing flow analogs of electronic circuit components such as fluidic diodes and capacitors. The electronic component that has so far been overlooked in the microfluidics literature-the fuse-is a passive safety device that relies on a controlled failure mechanism (melting) to protect a circuit from overcurrent. Here, we describe how a compliant Hele-Shaw cell behaves in a manner analogous to the electrical fuse; above a critical flux, the flow-induced deformation of the cell blocks the outflow, interrupting (choking) the flow. In particular, the pressure distribution within the fluid applies a spatially variant normal force to the soft boundary, which causes nonuniform deformation. As a consequence of lateral confinement and incompressibility of the soft material, this flow-induced elastic deformation manifests as bulging near the cell outflow; bulges that come into contact with the rigid cell roof interrupt the flow. We identify two nondimensional parameters that govern the central deflection and the choking of the cell, respectively. This study therefore provides the mechanical foundations for engineering passive-flow limiters into fluidic devices.
Highlights
After centuries of striving for structural rigidity, engineers and scientists alike are increasingly looking to harness the deformation, buckling, and failure of soft materials for functionality
A fundamental challenge in the deployment of microfluidic devices outside of the laboratory lies in removing the dependence of these lab-on-chip devices on off-chip hardware, such as intricate plumbing systems and external actuators
A bed of soft hairs tethered to channel walls at an angle provides low resistance to flow in one direction and high resistance to flow in the opposite direction, in a manner analogous to an electronic diode [9], because flow with the grain bends hair tips toward the channel walls, whereas flow against the grain bends hair tips toward the channel center
Summary
After centuries of striving for structural rigidity, engineers and scientists alike are increasingly looking to harness the deformation, buckling, and failure of soft materials for functionality.
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
